
Geistlich Bio-Oss Pen®
Preparation of Geistlich Bio-Oss Pen® is quick and easy:
- Tear off the protective seal and unscrew the protection cap.
- Do not remove the red/green filter cap.
- Place the filter cap into sterile physiological saline solution or patient blood.
- Pull the plunger back and press down several times until Geistlich Bio-Oss® is completely moistened.
- Alternatively, use a syringe to inject saline or blood directly through the filter cap.
- Gently press the plunger to eject any excess fluid.
- Replace the filter cap with the curved applicator tip.
- Apply directly to the surgical site.
Holding the Geistlich Bio-Oss Pen® firmly, tear off the protective seal (A) and unscrew the protection cap (B).
Do not remove the red/green filter cap from the Geistlich Bio-Oss Pen® at this point.
Place the filter cap into sterile saline solution or patient blood. Pull back and press down the plunger several times until Geistlich Bio-Oss® is completely moistened. Alternatively, a syringe (not included) may be used to inject saline or blood directly through the filter cap.
Replace the filter cap (A) with the curved applicator tip (B). and apply Geistlich Bio-Oss® directly to the surgical site.
Geistlich Bio-Oss Pen® with large granules is recommended for large ridge augmentation procedures and for sinus floor elevation procedures.
CAUTION: Federal law restricts these devices to sale by or on the order of a dentist or physician.